Aluminium Scaffolding Used as Elevator Scaffolding, Lift Shaft Formwork

Elevator shaft's corner

The elevator shaft's corner is the transmit component to assist the panel strip off from the concrete. Using a wrench to turn the transmit pole on the top running the slider connect with the aluminum structure to achieve the expansion and shrinking. Transmission part is attached and protected by the electrophoretic aluminum alloy shell which is smooth enough and not sticky to the concrete. 

Elevator shaft base

Instead of scaffolding, the shaft base is support by the 4 claws below the platform sitting on the pre-embeded hole. It provides an operating platform for labors to adjust the inner shaft formwork system into a exact opposite position to the ground floor by laser gradienter in four corner, make sure the shaft construction is accurate and straight.

Elevator shaft frame & panel

The frames are customized to the right size according to demand, also the plywood panels. Both are changeable adapted to the shaft's corner to achieve different size of elevator shaft

Base stand reserving box installation

In order to fulfill the scaffolding-free and crane-free installation from high, the reserving box need to be pre-embeded on the concrete wall for the platform sitting steady in the shaft for further construction. The reserving box should be attached on the plat form before every pour.

1.Panel A nailed on a predetermined position for positioning. 

2.Drill a 16mm diameter hole on the panel.

3.Let screw D with dia. 14mm insert into the claw box for connection.

4.Make sure the 14mm plug C already insert inside the claw box. 

5.Place the plug box on the anchor point, use the nut E to fix it.

Advantages:                                                                               

* Safe, base can bearing 4 Ton, and there is  shaft cover. 

* Lightweight  , aluminium combine with plywood

* Easy handle: shaft corner make the system

  contraction-lift- expand ,

* Accurate size & fair concrete finish.

Application on the jobsite :

Our company : 

Shandong Square Circle Building Materials Co.,Ltd

  Square Circle Formwork is a manufacturer and supplier of formwork products which aim to meet the needs of the current formwork market with our labor saving and environmental-friendly formwork system.
 Our company uses a combination of steel, plywood and plastic materials in the development of the wide range of fine formwork products which benefit thousands of contractors all over the world. 
Square Circle Formwork offers prefabricated products, designed by our inhouse engineering team which are customized to meet the exact needs of theformwork on your project. 
Our products when compared totraditional forming methods,